WEKO3
アイテム
{"_buckets": {"deposit": "88098dcd-1dff-4747-bd02-dfd38a0d6e33"}, "_deposit": {"created_by": 2, "id": "20798", "owners": [2], "pid": {"revision_id": 0, "type": "depid", "value": "20798"}, "status": "published"}, "_oai": {"id": "oai:nagasaki-u.repo.nii.ac.jp:00020798", "sets": ["21"]}, "author_link": ["87606", "87607"], "item_2_biblio_info_6": {"attribute_name": "書誌情報", "attribute_value_mlt": [{"bibliographicIssueDates": {"bibliographicIssueDate": "1985-11", "bibliographicIssueDateType": "Issued"}, "bibliographicIssueNumber": "245", "bibliographicPageEnd": "2729", "bibliographicPageStart": "2723", "bibliographicVolumeNumber": "28", "bibliographic_titles": [{"bibliographic_title": "Bulletin of JSME"}]}]}, "item_2_description_4": {"attribute_name": "抄録", "attribute_value_mlt": [{"subitem_description": "When the tooth of a nylon gear of visco-elastic body was applied with a force the tooth deflected largely and a rotational lag occurred at the mating steel gear. This caused an abnormal abrasion at nylon gear tooth flanks and the tooth profile changed conspicuously. In order to prevent these things, the nylon gear was developed. The gear included a stiffener of steel in the core of tooth and the tooth was made hard to deflect. In this report, the manufacture of this gear was outlined and the characteristic of abrasion and the tooth profile change in the course of operation were made clear.", "subitem_description_type": "Abstract"}]}, "item_2_description_63": {"attribute_name": "引用", "attribute_value_mlt": [{"subitem_description": "Bulletin of JSME. 1985, 28(245), p.2723-2729", "subitem_description_type": "Other"}]}, "item_2_publisher_33": {"attribute_name": "出版者", "attribute_value_mlt": [{"subitem_publisher": "社団法人日本機械学会"}]}, "item_2_rights_13": {"attribute_name": "権利", "attribute_value_mlt": [{"subitem_rights": "社団法人日本機械学会"}, {"subitem_rights": "本文データは学協会の許諾に基づきCiNiiから複製したものである"}]}, "item_2_source_id_10": {"attribute_name": "書誌レコードID", "attribute_value_mlt": [{"subitem_source_identifier": "AA0058509X", "subitem_source_identifier_type": "NCID"}]}, "item_2_source_id_7": {"attribute_name": "ISSN", "attribute_value_mlt": [{"subitem_source_identifier": "00213764", "subitem_source_identifier_type": "ISSN"}]}, "item_2_version_type_16": {"attribute_name": "著者版フラグ", "attribute_value_mlt": [{"subitem_version_resource": "http://purl.org/coar/version/c_970fb48d4fbd8a85", "subitem_version_type": "VoR"}]}, "item_creator": {"attribute_name": "著者", "attribute_type": "creator", "attribute_value_mlt": [{"creatorNames": [{"creatorName": "Tsukamoto, Naohisa"}], "nameIdentifiers": [{"nameIdentifier": "87606", "nameIdentifierScheme": "WEKO"}]}, {"creatorNames": [{"creatorName": "Terashima, Kenichi"}], "nameIdentifiers": [{"nameIdentifier": "87607", "nameIdentifierScheme": "WEKO"}]}]}, "item_files": {"attribute_name": "ファイル情報", "attribute_type": "file", "attribute_value_mlt": [{"accessrole": "open_date", "date": [{"dateType": "Available", "dateValue": "2020-12-23"}], "displaytype": "detail", "download_preview_message": "", "file_order": 0, "filename": "JSME_28_245_2723.pdf", "filesize": [{"value": "631.1 kB"}], "format": "application/pdf", "future_date_message": "", "is_thumbnail": false, "licensetype": "license_free", "mimetype": "application/pdf", "size": 631100.0, "url": {"label": "JSME_28_245_2723.pdf", "url": "https://nagasaki-u.repo.nii.ac.jp/record/20798/files/JSME_28_245_2723.pdf"}, "version_id": "f238cf06-26ff-4428-b0a2-047cd34d07ae"}]}, "item_keyword": {"attribute_name": "キーワード", "attribute_value_mlt": [{"subitem_subject": "Machine Element", "subitem_subject_scheme": "Other"}, {"subitem_subject": "Tribology", "subitem_subject_scheme": "Other"}, {"subitem_subject": "Lubrication", "subitem_subject_scheme": "Other"}, {"subitem_subject": "Wear", "subitem_subject_scheme": "Other"}, {"subitem_subject": "Sound", "subitem_subject_scheme": "Other"}, {"subitem_subject": "Gear", "subitem_subject_scheme": "Other"}, {"subitem_subject": "Plastic Gear", "subitem_subject_scheme": "Other"}, {"subitem_subject": "Nylon Gear", "subitem_subject_scheme": "Other"}, {"subitem_subject": "Tooth Profile", "subitem_subject_scheme": "Other"}]}, "item_language": {"attribute_name": "言語", "attribute_value_mlt": [{"subitem_language": "eng"}]}, "item_resource_type": {"attribute_name": "資源タイプ", "attribute_value_mlt": [{"resourcetype": "journal article", "resourceuri": "http://purl.org/coar/resource_type/c_6501"}]}, "item_title": "Investigation about the Prevention of Tooth Profile Change of Plastic Gears : 2nd Report; Abrasion and tooth profile change of nylon gears, reinforced with a stiffener", "item_titles": {"attribute_name": "タイトル", "attribute_value_mlt": [{"subitem_title": "Investigation about the Prevention of Tooth Profile Change of Plastic Gears : 2nd Report; Abrasion and tooth profile change of nylon gears, reinforced with a stiffener"}]}, "item_type_id": "2", "owner": "2", "path": ["21"], "permalink_uri": "http://hdl.handle.net/10069/16759", "pubdate": {"attribute_name": "公開日", "attribute_value": "2008-04-28"}, "publish_date": "2008-04-28", "publish_status": "0", "recid": "20798", "relation": {}, "relation_version_is_last": true, "title": ["Investigation about the Prevention of Tooth Profile Change of Plastic Gears : 2nd Report; Abrasion and tooth profile change of nylon gears, reinforced with a stiffener"], "weko_shared_id": -1}
Investigation about the Prevention of Tooth Profile Change of Plastic Gears : 2nd Report; Abrasion and tooth profile change of nylon gears, reinforced with a stiffener
http://hdl.handle.net/10069/16759
http://hdl.handle.net/10069/167598ec54b31-b87b-4d55-9ab5-a6c064e44697
名前 / ファイル | ライセンス | アクション |
---|---|---|
JSME_28_245_2723.pdf (631.1 kB)
|
|
Item type | 学術雑誌論文 / Journal Article(1) | |||||
---|---|---|---|---|---|---|
公開日 | 2008-04-28 | |||||
タイトル | ||||||
タイトル | Investigation about the Prevention of Tooth Profile Change of Plastic Gears : 2nd Report; Abrasion and tooth profile change of nylon gears, reinforced with a stiffener | |||||
言語 | ||||||
言語 | eng | |||||
キーワード | ||||||
主題Scheme | Other | |||||
主題 | Machine Element | |||||
キーワード | ||||||
主題Scheme | Other | |||||
主題 | Tribology | |||||
キーワード | ||||||
主題Scheme | Other | |||||
主題 | Lubrication | |||||
キーワード | ||||||
主題Scheme | Other | |||||
主題 | Wear | |||||
キーワード | ||||||
主題Scheme | Other | |||||
主題 | Sound | |||||
キーワード | ||||||
主題Scheme | Other | |||||
主題 | Gear | |||||
キーワード | ||||||
主題Scheme | Other | |||||
主題 | Plastic Gear | |||||
キーワード | ||||||
主題Scheme | Other | |||||
主題 | Nylon Gear | |||||
キーワード | ||||||
主題Scheme | Other | |||||
主題 | Tooth Profile | |||||
資源タイプ | ||||||
資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||
資源タイプ | journal article | |||||
著者 |
Tsukamoto, Naohisa
× Tsukamoto, Naohisa× Terashima, Kenichi |
|||||
抄録 | ||||||
内容記述タイプ | Abstract | |||||
内容記述 | When the tooth of a nylon gear of visco-elastic body was applied with a force the tooth deflected largely and a rotational lag occurred at the mating steel gear. This caused an abnormal abrasion at nylon gear tooth flanks and the tooth profile changed conspicuously. In order to prevent these things, the nylon gear was developed. The gear included a stiffener of steel in the core of tooth and the tooth was made hard to deflect. In this report, the manufacture of this gear was outlined and the characteristic of abrasion and the tooth profile change in the course of operation were made clear. | |||||
書誌情報 |
Bulletin of JSME 巻 28, 号 245, p. 2723-2729, 発行日 1985-11 |
|||||
出版者 | ||||||
出版者 | 社団法人日本機械学会 | |||||
ISSN | ||||||
収録物識別子タイプ | ISSN | |||||
収録物識別子 | 00213764 | |||||
書誌レコードID | ||||||
収録物識別子タイプ | NCID | |||||
収録物識別子 | AA0058509X | |||||
権利 | ||||||
権利情報 | 社団法人日本機械学会 | |||||
権利 | ||||||
権利情報 | 本文データは学協会の許諾に基づきCiNiiから複製したものである | |||||
著者版フラグ | ||||||
出版タイプ | VoR | |||||
出版タイプResource | http://purl.org/coar/version/c_970fb48d4fbd8a85 | |||||
引用 | ||||||
内容記述タイプ | Other | |||||
内容記述 | Bulletin of JSME. 1985, 28(245), p.2723-2729 |