In this paper, the planar sleeve antenna exited by the CPW is analyzed from the standpoints of return loss characteristics and radiation characteristics. The sleeve antenna is printed on the dielectric plate and three planar sleeves are located outside of the CPW. The open ends of three sleeves are aligned on the same position of the CPW and three sleeves are attached on the upper radiator extended from the central conductor of the CPW. From the calculated current distribution on the CPW, the leakage current on the CPW flowing from the sleeve radiator is investigated. The design frequencies of three sleeves are 3.5 GHz, 4.0 GHz and 4.5 GHz. The effect of sleeves is discussed from the calculated current distribution on the antenna and the radiation patterns.
内容記述
IEEE Antennas and Propagation Society International Symposium 2007, Honolulu, HI, 9-15 June 2007
雑誌名
IEEE Antennas and Propagation Society International Symposium 2007
ページ
4773 - 4776
発行年
2007-06
ISBN
1-4244-0878-4
DOI
10.1109/APS.2007.4396611
権利
(c)2007 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
著者版フラグ
publisher
出版者
IEEE
資源タイプ
text
引用
IEEE Antennas and Propagation Society International Symposium, pp.4773-4776; 2007
Planar Sleeve Antenna for Low-Band UWB System
APSIS2007_4773.pdf
(291.58KB)
NAOSITEについて