@article{oai:nagasaki-u.repo.nii.ac.jp:00014336,
 author = {児玉, 好雄 and 葉山, 賢司 and 林, 秀千人 and 田中, 清裕 and 河部, 秀彦},
 issue = {35},
 journal = {長崎大学工学部研究報告, Reports of the Faculty of Engineering, Nagasaki University},
 month = {Jul},
 note = {Theoretical pressure head was derived to a laminar flow fan. And the head losses, due to a flow friction and the losses in the rotor inlet and of the divergent flow at the rotor outlet, were predicted theoreticaly. The calculation with these theories shows that the optimum parameters exist to this type fan. The theoretical pressure head goes down when a radius ratio (ri/ro) is greater than 0.8 or a distance between two disks δD is large, and the degree of the going down is so much at flow coefficient less than 0.05. The pressure head losses is consisted mostly of the losses due to a flow friction at δD less than 1.0 mm, but mostly of the losses out of the rotor outlet at δD greater than 1.0 mm. The losses in the rotor inlet isn't so great at any conditions. That is, the minimum head losses is obtained at δD = 0.8 mm., 長崎大学工学部研究報告, 21(35), pp.21-28; 1990},
 pages = {21--28},
 title = {層流ファンの理論揚程と諸圧力損失},
 volume = {21},
 year = {1990}
}